Run a rubber band lengthwise across your open paint can. Use it to wipe excess paint off your brush. This keeps the rim clean, prevents paint from dripping down the sides, and ensures the lid seals properly when you're done.

Doors that won't latch properly often just need a quick adjustment. Bend the strike plate's tab slightly outward with pliers to create a tighter connection. This small tweak can fix a door that's not catching or one that rattles when closed.

For holes between 2-4 inches: Cut a piece of drywall slightly larger than the hole. Trace it on the wall, then cut your wall outline 1/2 inch smaller than your tracing. The drywall piece will fit precisely with minimal mudding needed - creating a stronger repair than mesh patches.

Place a wide rubber band between your screwdriver and the stripped screw head. The rubber provides extra grip, allowing you to remove screws that seem hopelessly stuck. Works on both flathead and Phillips head screws.

Empty your dishwasher and check the filter at the bottom - it twists out easily. Clean it in hot water, then place a cup of white vinegar on the top rack and run a hot cycle. This removes buildup, eliminates odors, and helps prevent future clogs.

When sliding doors become sticky, clean the track thoroughly and then apply a light coating of car wax. Buff it in and wipe off excess. The door will glide smoothly for months, and the wax creates a protective barrier against debris.

Wrap a flat screwdriver with a microfiber cloth dampened with vinegar. Run it along your window tracks to remove built-up dirt. The vinegar breaks down grime while the cloth-wrapped tool reaches tight corners that brushes can't access.

Unscrew your shower head and soak it in a plastic bag filled with equal parts hot water and CLR for 30 minutes. This dissolves mineral deposits inside the nozzles, restoring full water pressure and eliminating irregular spray patterns.

If your toilet fill valve makes a loud screeching noise, adjust the fill height by squeezing the clip on the float arm and sliding it down slightly. This reduces water pressure and eliminates the whistle that occurs when the tank refills.

When ceiling fans wobble, clean the blades thoroughly first. If it still wobbles, get a balancing kit from any hardware store. Clip the weights on top of the blades one at a time until you find the spot that stops the wobble. A balanced fan runs silently and more efficiently.

— Sarah M., Fairhope, AL

— Emma R., Fairhope, AL

Take the first step towards a hassle-free home maintenance experience. Contact Fairhope Fix now for a free, no-obligation quote and discover why we're the preferred choice for homeowners in Fairhope, Alabama.